13KGHT73 2 Simple Steps to Find Your Strap Size - Indianleathercraft

Spend just ₹ 7,000.00 To Get FreeShipping

2 Simple Steps to Find Your Strap Size

2 Simple Steps to Find Your Strap Size

Simple steps on how to find your strap your strap size

Step 1: Determine your lug width & buckle width (A and B)

To determine your width, you can take a ruler or caliper, and measure the width of the part of the strap that uses spring bars / screws to attach to your watch case. Measure this in millimeters. Width is expressed, for example like this: 24/22 (24mm wide by 22mm wide). This first number (24mm) is the width of the strap between the lugs of the watch case. The second number (22mm) is the width of the strap at the buckle.

A “straight” strap is one that is the same width at the lugs and the buckle, i.e 24/24 (24mm wide at lugs by 24mm wide at buckle). While a “tapered” strap is one that tapers in width from the lugs to the buckle, i.e 24/22 (24mm wide at lugs by 22 wide at buckle).

If you don’t find lug width of your watch below, and feel difficulty to determine the lug width, please tell us the brand name, and model of your watches, or simply the pictures of your watches, and we will help you figure out.

Shop Now

Step 2: Determine your long strap length and short strap length (C and D)

There are two lengths required, the tail end (length of long section), and the buckle end (length of short section, excluding buckle). Length is expressed, for example like this: 125/75. The first number (125) is the length in millimeters of the tail end with holes. The second number (75) is the length in millimeters of the buckle end.

The strap length suggestion is based on wrist size. To determine the your wrist length, you can simply wrap a piece of string/thread around your wrist at the point where you normally wear your watch, mark the string where it crosses itself, lay it flat on a table and measure the distance between the marks. This is your wrist size.

The table below is an excellent place to start for help you decide your size length order.


Buy Now


However, don’t let this table be your strict rule. Choosing the strap length is all personal preference. There is no “right” or “wrong” in choosing them. A length that we consider “too short”, or “too long” might consider to be “just right” for you.  Strap length is an art, and as your taste changes, your idea of what looks “just right” will probably change too. For example, If your wrist is 6.7”, you can also go with 125/75mm for a more conservative look (less tail, centered buckle), or you could go up to 130/80 for a longer look (more tail, buckle over to the side more).

Congratulations! You now know what size band your watch accepts and are ready to find the perfect new strap.Click here to shop now

Simple steps on how to find your strap your strap size

Step 1: Determine your lug width & buckle width (A and B)

To determine your width, you can take a ruler or caliper, and measure the width of the part of the strap that uses spring bars / screws to attach to your watch case. Measure this in millimeters. Width is expressed, for example like this: 24/22 (24mm wide by 22mm wide). This first number (24mm) is the width of the strap between the lugs of the watch case. The second number (22mm) is the width of the strap at the buckle.

A “straight” strap is one that is the same width at the lugs and the buckle, i.e 24/24 (24mm wide at lugs by 24mm wide at buckle). While a “tapered” strap is one that tapers in width from the lugs to the buckle, i.e 24/22 (24mm wide at lugs by 22 wide at buckle).

If you don’t find lug width of your watch below, and feel difficulty to determine the lug width, please tell us the brand name, and model of your watches, or simply the pictures of your watches, and we will help you figure out.

Shop Now

Step 2: Determine your long strap length and short strap length (C and D)

There are two lengths required, the tail end (length of long section), and the buckle end (length of short section, excluding buckle). Length is expressed, for example like this: 125/75. The first number (125) is the length in millimeters of the tail end with holes. The second number (75) is the length in millimeters of the buckle end.

The strap length suggestion is based on wrist size. To determine the your wrist length, you can simply wrap a piece of string/thread around your wrist at the point where you normally wear your watch, mark the string where it crosses itself, lay it flat on a table and measure the distance between the marks. This is your wrist size.

The table below is an excellent place to start for help you decide your size length order.


Buy Now


However, don’t let this table be your strict rule. Choosing the strap length is all personal preference. There is no “right” or “wrong” in choosing them. A length that we consider “too short”, or “too long” might consider to be “just right” for you.  Strap length is an art, and as your taste changes, your idea of what looks “just right” will probably change too. For example, If your wrist is 6.7”, you can also go with 125/75mm for a more conservative look (less tail, centered buckle), or you could go up to 130/80 for a longer look (more tail, buckle over to the side more).

Congratulations! You now know what size band your watch accepts and are ready to find the perfect new strap.Click here to shop now

Related articles
Recent articles
Watch straps

Watch straps

handmade omega watch strap

Indian Leather Craft Look Book

Making of leather watch strap

Making of leather watch strap

royal enfield modified bullet leather key cover best quality made in india

Making the Royal enfield leather key cover

Filter by tags

Leave a comment

Please note, comments must be approved before they are published

Whatsapp